ABS SOLVENT CEMENT V-TECH 500G CONSTRUCTION PIPE CEMENT GLUE

Product Description

V TECH VT310 ABS Solvent Cement

Description:

'A premium quality, Blue color, high strength adhesive formulated for ABS fitting and pipes bond applications. It is easy-to-use, fast setting and offers superior bonding strength. 'Special For ABS Pipes
'Good Adhesion
'Waterproof Bonding
'It is easy to use, fast setting, waterproof bonding and offers superior bonding strength.
'Ideal for bonding and coupling and ABS fitting and pipes.
'Upon full cure, it is safe for drinking water, irrigation, waste water, sanitary pipes and conduit etc.

Specification:

'Brand : VTECH
'Model : VT-310
'Variants : 500g | 100 g

Direction for use

1. Surfaces must be clean, dry and free of dirt, grease, oil or water.
2. Clean the surfaces thoroughly using Pipe Cleaner.
3. Use fast dry crepe paper or toilet tissue to soak the cleaner. Always use fresh and clean paper.
4. Apply the cement to both surfaces to be bonded with a dry, clean brush to give a uniform coating, with heavier coat at the pipe end. It will dissolve and soften the surfaces of the pipes and fitting.
5. Assemble while cement is wet.
6. When the pipes and fitting are assemble together, the softened surfaces mix and on hardening produce chemically welded joint.
7. Hold firmly for 30 seconds to allow initial bonding, and then remove surplus solvent cement.
8. Joint should not be disturbed for 15 minutes. 12 hours for drying time should be allowed before working pressure, and 24 hours before testing to 1.5 working pressure.

Applications:

Ideal for bonding and coupling and ABS fitting and pipes. Upon full cure, it is safe for drinking water, irrigation, waste water, sanitary pipes and conduit etc.