MOVIMOT Standard inverters for direct mounting on the motor. Thanks to our modular concept, the MOVIMOT® D series can be combined as standard with our DR.. series AC motors with different levels of efficiency.
Mounting close to the motor is also possible. There are different diagnostics options available. A 3 color LED signalizes operating and fault states. The inverter is equipped with a diagnostic interface, an RS-485 serial interface and much more. Our frequency inverter is flexibly available with a connection voltage of 200 V to 240 V or 380 V to 500 V.
Features:
- Vector-oriented motor control
- Full motor protection
- Brake management
- Ambient temperature from –30 °C or –20 °C to +40 °C
- Control via binary signals: Inputs for CW/stop, CCW/stop, setpoint changeover, isolated signal relay, fixed setpoints, ramps for acceleration and deceleration
- Control via fieldbus communication, with and without minicontrollers:
- PROFIBUS®
- INTERBUS
- DeviceNETTM
- AS-Interface
- PROFINET® IO
- SBUSPLUS/EtherCAT®
- Startup modes: easy, expert, central via PLC
- Use in stand-alone applications. In combination with the options:
- MLU..A: Local DC 24 V supply
- MLG.1A: Local setpoint adjuster with DC 24 V supply
- MBG11A: Setpoint adjuster for setting and displaying the setpoint frequency
- MWA21A: Setpoint converter for interfacing analog setpoints (0 to 10 V, 0 to 20 mA, 4 to 20 mA) to RS-485
- Use in decentralized installation in combination with field distributors:
- MF.../Z.3.
- MF.../Z.6.
- MF.../.../Z.7.
- MF.../.../Z.8.
- 3 color LED signalizes operating and fault states
- Approval: IEC or cULus
Benefits:
1. Fast installation
- The pluggable motor connection enables fast replacement during servicing.
2. Simple startup
- Manually settable setting setpoints.
3. Reliable design
- Additional mechanical protection not necessary thanks to the robust solid metal housing. Permanent IP protection of the electronics.
4. Well-conceived communication
- Through standardized fieldbus interfaces with all commercially available bus systems.
5. Durable electronics
- Optimized, motor-independent cooling for use in a speed range of 300 rpm to 3000 rpm.
6. Flexible installation
- With field distributors, rational connection of fieldbus and sensors. Directly on the motor or separately next to the drive.
US 13924 
GB 10405 
CA 8659 
AU 6903 
IE 1817 
IN 1285 
NZ 1159 
BR 803 
