Above videos are the testing drilling video for our TF-1700H.
The testing working piece is:
Material: S45C
Thickness: 35mm
Speed: 50rpm
Feed: 0.1mm/rpm
Diameter ∅: 45mm
Category by 全部
Testing Tapping TF-2000H
Please refer to the following three mails to choose the promo video you want to put on your website.
Above videos are the testing tapping video for our TF-2000H.
The testing working piece is:
Material: S45C
Thickness: 35mm
Diameter ∅: 58mm
Tapping: 64mm, P6.0
We tap the hole with third time screw thread under the strictest condition also can get the perfect works.
Category by 全部
Testing Drilling TF-2000H
Above videos are the testing drilling video for our TF-2000H.
The testing working piece is:
Material: S45C
Thickness: 35mm
Diameter ∅: 90mm
You can find from the above videos, we use 90mm Drill to drill through the workpiece in one time without drilling any small holes firstly.
Please read the numbers on the Dial Indicator of our machine, our TF-2000H is with steady, super strong torgue and large machine thurst function while running.
Category by 全部
总办事处
Fretech Engineering 200603106951 (JM0457647-D)
9, Jalan Makmur 2, Taman Perindustrian Cemerlang, 81800 Ulu Tiram, Johor, Malaysia.