C-Purlin is a horizontal beam or bar used for structural support in buildings, most commonly in a roof. Purlins are supported either by rafters or the walls of the building. Steel Purlins are light weight, dimensionally stable, accurate and straight. They expand and contract reasonably in extreme temperature changes. The cold roll forming process results in high degree of consistency and accuracy in the dimension of the sections.


Application :
 

• Vertical Sheeting Rails
• Brickwork Restraints
• Mezzanine Floors
• Suspended Ceiling System

Material Specifications :

           
                               








                         


DISCLAIMER: The information on the materials presented herein is provided for informational purposes only. Any omission, error, typographical errors and technical inaccuracies relating to the information may be changed or update without notice. Tolerance may occur and they are subject to change and variations in accordance to finished product’s condition.




Purlin Punch Hole:

 Our C-Purlins are supplied according to length and pre-punched holes (round or elongated) on the webs, enabling prompt installation at site.





Specification Hole Size:

• Ø14mm
• Ø14mmX22mm
• Ø14mmX16mm
• Ø16mm
• Ø17mm X 19mm
• Ø18mm
• Ø18mm X 22mm

* Custom made punching position & hole size are also available



Accessories:

1. Purlin Bracket ( Purlin Connector / Cleat )








         




2. Tie Rod / Sag Rod




3. Purlin Bridging