The machine is composed of cleaning system, rinsing system, fine rinsing, drying system and filtration system
100% Close loop operation, Zero discharge
The equipment is rinsed with water-based liquid detergent and DI water, without any potential safety hazard and no harm to personnel
-
◆High pressure spray system for PCB / PCBA cleaning process with water-based detergent
◆Three liquid tanks equipped with heating system to meet the needs of cleaning, rough rinsing, fine rinsing and hot air drying
◆Process flow: Cleaning - chemical isolation - rinsing (open-loop / closed-loop) - drying
◆Advanced automatic touch screen operation software, program files can be saved and easy to use
◆The counting function of the system can automatically accumulate the number of cleaning PCB boards and the number of cycles of filtering
◆The liquid and pump pressure can be displayed by the panel pressure gauge to feed back the operation status of the equipment in time
◆Conductivity monitoring rinse liquid to ensure cleanliness, conductivity can be set to meet different PCB process requirements
◆Solid and durable overall stainless steel body; acid or alkaline detergent resistant
◆The rinsing method is overflow, and the water from the fine rinsing overflows to the rough rinsing tank without repeated pollution
◆High pressure fan + hot air drying, the drying effect is faster and thorough
◆Running cost more low, just consumption 80-120ml solvent for pre clean cycle. the residual liquid on pipeline and pump will direct recycle, could reduce 50% consumption
Dimension（mm）
L1670*W1100*H1860
Power supply
Three phase380V（3 phase 5 cable）
Total Power
33KW
Current
50A
Air supply
0.4-0.6Mpa
Exhaust port
Ø125
Clean tank volume
42L
Pre-rinse tank volume
28L
Rinse tank volume
55L
Filter
0.2μm 10 inch
Clean basket
500*550*100MM（two layer）
Clean time
8--10Min
Clean method
Spray-Pre rinse- Rinse- hot-air drying
Control
PLC+Touch screen（ One button start ）
US 18479 
GB 13059 
CA 11109 
AU 8908 
IE 4502 
NZ 3056 
BR 1100 
MY 1003 
