Control Techniques High Frequency AC Drives, Unidrive HS30

0.25 kW – 7.5 kW (0.33 hp – 10 hp)

200 V / 400 V

Unidrive HS30 is designed for applications that require cost effective integration into safety systems and incorporates dual Safe Torque Off and advanced Rotor Flux Control (RFC-A) of open loop induction motors.

• Features

  Conform to safety standards, maximize uptime and reduce costs by integrating directly with safety systems

  • HS30 has integrated dual STO inputs for SIL3, PLe conformity, eliminating the need for external safety components

  
  

  Improve throughput with advanced open-loop motor control algorithms

  • Rotor Flux Control (RFC-A) gives maximum stability and control of induction motors at all powers.
  • 180% motor overload suitable for heavy industrial machinery applications

  
  

  Flexible system integration with SI communications options

  • HS30's SI interface enables integration with a wide range of available industry standard fieldbuses and I/O

  
  

  Install and configure quickly and easily

  • Simple fixed LED keypad
  • Useful parameter guide located on the front of the drive
  • Use Unidrive M Connect or an SD card with the AI-Backup adaptor to clone and transfer parameter sets
  • DIN rail mounting is supported below 1.5 kW
• Specifications

  Key data

  • Heavy Duty rating: 0.25 - 132 kW (0.33 - 179 hp)
  • Supply phases:
    • Size 1 to 4: 110 V drives – 1 phase, 230 and 400 V drives - 1 or 3 phase
    • Size 5 upwards: 3 phase

  
  

  Standard features

  Machine safety:

  • 2 x Safe Torque Off terminals

  Keypad:

  • Fixed LED

  Option slots:

  • 1 (Size 2 and above)

  Parameter cloning via:

  • PC tools
  • SD card with AI-Smart Back Up
  • AI-Smart Adaptor

  VOLTAGE RATINGS
  100 V (100 V - 120 V ± 10%)	✓
  200 V (200 V - 240 V ± 10%)	✓
  400 V (380 V - 480 V ± 10%)	✓
  575 V (500 V - 575 V ± 10%)	✓
  690 V (500 V - 690 V ± 10%)

  CONTROL MODE
  Open loop vector or V/Hz induction motor control	✓
  Open loop Rotor Flux Control for induction motors (RFC-A)	✓
  Open loop permanent magnet motor control (RFC-S)
  Closed loop Rotor Flux Control for induction motors (RFC-A)
  Closed loop permanent magnet motor control (RFC-S)
  Active Front End (AFE) power quality convertor

   

  FRAME SIZE	DIMENSIONS (H X W X D)		WEIGHT
  	mm	in	kg	lb
  1	160 x 75 x 130 DIN rail mounting* 137 x 75 x 130	6.3 x 3.0 x 5.1 DIN rail mounting* 5.4 x 3.0 x 5.1	0.75	1.65
  2	205 x 75 x 150 DIN rail mounting* 180 x 75 x 150	8.1 x 3.0 x 5.9 DIN rail mounting* 7.1 x 3.0 x 5.9	1.0	2.2
  3	226 x 90 x 160	8.9 x 3.5 x 6.3	1.5	3.3
  4	277 x 115 x 175	10.9 x 4.5 x 6.9	3.13	6.9

  *Additional fixings required to maximize security
• Options

  Keypad

  Remote keypad All the features of the CI-Keypad LCD, but remote mountable. This allows flexible mounting on the outside of a panel and meets IP66 (NEMA 4)

  System Integration Modules - Communications

  	SI-PROFIBUS PROFIBUS interface module
  	SI-DeviceNet DeviceNet interface module
  	SI-CANopen CANopen interface module.
  	SI-Ethernet External Ethernet module that supports EtherNet/IP and Modbus TCP/IP
  	SI-EtherCAT EtherCAT interface module
  	SI-PROFINET RT PROFINET interface module

  System Integration Modules - Additional I/O

  SI-I/O Extended I/O interface module to increase the number of I/O points on a drive

  Drive interface units - Back-up

  	AI-Back-up Adaptor Port adaptor for SD card parameter cloning, and an input for 24 V back-up
  	AI-Smart Adaptor Has a built-in memory for parameter cloning, and an input for 24 V back-up

  Drive interface units - Communications

  	AI-485 Adaptor 24 V Port adaptor that allows the drive to communicate via RS485. Includes an input for 24V
  	CT USB Comms Cable The USB Comms cable allows the drive to connect to a PC for use with Unidrive M's PC tools*

   

  * Also requires an adaptor.

• Software

  Commissioning and monitoring software

  Unidrive M Connect - Commissioning tool Based on Control Techniques’ 25 years' experience, Unidrive M Connect is our latest drive configuration tool for commissioning, optimizing and monitoring drive/system performance

   Automation and motion programming software

  Machine Control Studio - Programming tool Control Techniques' Machine Control Studio provides a flexible and intuitive environment for programming Unidrive M’s new automation and motion control features.