Product Description
The Dimension CP-Series are cost optimized power supplies without compromising quality, reliability and performance. The most outstanding features of the CP20.241–R1/-R2 units are the high efficiency, electronic inrush current limitation, active PFC, wide operational temperature range and the extraordinary small size. The units include a decoupling MOSFET for building 1+1 or N+1 redundant power supply systems. The devices also offer PowerBoost: Power reserves of 20%, which may even be used continuously at temperatures up to +45°C. These redundancy power supplies come with three connection terminal options; screw terminals, spring-clamp terminals or plug connector terminals which allows replacement on an active application. CP20.242-R2 version feature an enhanced DC input voltage range and the CP20.241-R2-C1 is additionally equipped with conformal coated pc-boards. With high immunity to transients and power surges, low electromagnetic emission, a DC-OK signal contact for remote monitoring, and a large international approval package, makes this unit suitable for nearly every application.

Redundancy Power Supply

• AC 100-240V Wide-range Input
• Width only 48mm
• Built-in Decoupling Mosfet for 1+1 and N+1 Redundancy
• Efficiency up to 95.2%
• 20% Output Power Reserves (PowerBoost)
• Safe HiccupPLUS Overload Mode
• Easy Fuse Breaking– 3 times nominal current for 12ms
• Active Power Factor Correction (PFC)
• Minimal Inrush Current Surge
• Full Power Between -40°C and +60°C
• DC-OK Relay Contact
• Current Sharing Feature Included
• 3 Year Warranty

Order Numbers
Power Supplies
CP20.241-R1 With quick-connect spring-clamp terminals
CP20.241-R2 With hot swappable plug connectors (preferred item)
CP20.242-R2 Enhanced DC-Input
CP20.241-R2-C1 With conformal coated pc boards

Accessory
ZM10.WALL Wall/panel mount bracket