柔佛,新山,茂士奥汀JB COMPRESSOR SERVICES SDN BHD的Energy Saving Product And Accessories-Thermal Mass Flow Sensor

CS-iTEC Thermal Mass Flow Sensor S 450

The CS-iTEC flow sensor S 450 is based on the thermal mass flow principle. It measures volumetric standard flow over a wide measuring range and compressed air consumption. The result is pressure and temperature independent.

S 450 flow / consumption sensor is designed specifically for harsh environments. The NEMA 4X enclosure with IP67 allows all-weather applications, All parts which come into contact with the measurement medium are made of stainless steel 316L. This allows applications in pharmaceutical and food industry, but also the measurement of corrosive and contaminated gas. Installations in explosive environment can be done through the optional ATEX approval. Various gases can be measured such as air, oxygen, argon, carbondioxyde, natural gas, hydrogen, methane, etc. Basically any gas mixture can be measured as long the mixing ratio and its components are known and constant.

html5: Video file not found

The modern factory world instrumentation requires interfaces to factory automation system.

CS-iTEC flow sensors not only supporting the traditional 4-20 mA outputs and pulse outputs, but also fieldbus interface for HART, Modbus and M-Bus. Since the flow sensors are based on a modular design other fieldbus can be adopted easily. The optional Display showing flow rates, consumption, medium temperature and diagnostic results.

Application

CS-iTEC Flow sensor provides practical, state-of-the-art, high-quality thermal mass flow sensor for gas flow applications such as

Compressed air flow and distribution
Airflow and distribution of process gases like Carbon dioxide, Argon, Nitrogen, Oxygen
Explosive gases like natural gas, hydrogen, bio gas
Corrosive gases like bio gas
Fuel and air supply to burners, boilers, industrial furnaces
Air flow in chillers
Dosing and gas injection control

Product features

Direct measurement of mass flow and standard flow without the need of pressure compensation
Wide range of tube sizes are supported with insertion type for big pipe diameters and in line types for small pipe diameters
No moving parts, non clogging
All parts which come into contact with the measurement medium are made of stainless steel 316L
Robust metal enclosure suitable for out-door applications in harsh environment
Wireless Bluetooth interface for sensor settingson ambient site
Display showing flow rates, consumption, meduim temperature and diagnostic results
2 analogue outputs (4-20 mA) and 1 pulse output
Available options:
Fieldbus interface: HART, MODBUS, M-BUS
Hazardous approval ATEX: II 2 G Ex d IIC T4
2-directional measurement
Flow conditioning

Technical data

Measuring range	0.4…92.7 sm/s (standard range calibration) 0.8 … 185 sm/s (max range calibration) (refer to table for flow measurement ranges in different tube diameters) *sm/s: standard meter per second
Accuracy	±(1.5% of reading + 0.3% full scale)
Stated accuracy at	Ambient/process temperature 23 °C 3°C Ambient/process humidity < 90 %, no condensation Process pressure at 0.6 MPa
Repeatability	0.25% of reading
Response time t95	<5 seconds
Sampling rate	Display and outputs are refreshed every 200 msec
Tube diameter	Insertion type: DN25 … DN1500 In line type: DN15 … DN80
Process connection	Insertion type: ½” G type thread(ISO 228-1) In line type: R thread(ISO 7-1), Flange EN 1092-1,ANSI /B16.5, JIS B2220
Measuring medium	Any gas where the components and the mixing ration are constant and known. See order information for a list of standard gases
Operating temperature	-40 … +150 °C (medium temp. insertion type) -40 … +100 °C (medium temp. in line type) -40 … +65 °C (ambient temperature)
Operating pressure	1.6 MPa (insertion type) 4.0 MPa (in line type)
Analogue output	2 x 4 … 20 mA, up to 400 R load, active/passive selectable, measurement channel selectable, scaling programmable
Pulse/Alarm output	Either alarm or pulse output. 1 pulse per 1,10 or 100 consumption units, Alarm programmable
Power supply	16-30 VDC, 5 W
Enclosure	IP 67
Sensor material	Stainless steel 1.4404 (SUS 316L)
Approvals	CE, RoHS ATEX : II 2 G Ex d IIC T4 / GB3836 / IECEx (Optional)
Fieldbus (Optional)	MODBUS HART
Configuration interface	CS-iTEC Service kit Bluetooth

Volumetric flow ranges
Inch	DN	Di[mm]	S-Rang [m³/h]	M-Range [m³/h]	HS-Range [m³/h]
1/2″	DN15	16.1	0.2~45.6	0.4~91.0	0.48~110.16
3/4″	DN20	21.7	0.4~89.1	0.9~177.8	1.09~215.3
1″	DN25	27.3	0.7~147.7	1.5~294.7	1.82~356.85
1¼”	DN32	36.0	1.3~266.3	2.6~531.5	3.15~643.51
1½”	DN40	41.9	1.8~366.7	3.6~731.9	4.36~886.18
2″	DN50	53.1	3.0~600.1	6.0~1197.6	7.26~1450.04
2½”	DN65	68.9	5.0~1026.5	10~2048.6	12.1~2480.44
3″	DN80	80.9	7.0~1424.4	14~2842.7	16.94~3441.91
4″	DN100	100.0	10~2183.3	20~4357.2	24.2~5275.71
5″	DN125	125.0	20~3419.6	38~6824.4	45.9~8263.09
6″	DN150	150.0	29~4930.1	58~9838.9	70.18~11913.10
8″	DN200	200.0	43~8785.6	88~17533.3	106.48~21229.51
10″	DN250	250.0	69~13743.9	137~27428.5	165.77~33210.69
12″	DN300	300.0	99~19814.8	198~39544.1	239.58~47880.39

您的名字 *
您的公司名字
您的邮件 *
您的联络号码 *
标题 *
信息 *
验证码 *

全名 *
邮件 *
联络电话 *
公司名字
公司地址
标题 *
我们如何可以帮助您？ *

柔佛,新山,茂士奥汀 - Thermal Mass Flow Sensor

Thermal Mass Flow Sensor

CS-iTEC Thermal Mass Flow Sensor S 450

html5: Video file not found

Application

Product features

Technical data