DXR10
| GENERAL SPECIFICATION | ||
| Speaker type | 10' 2-way, Bi-amp powered speaker, Bass-reflex type | |
| Frequency range | -10dB | 56Hz - 20kHz |
| Nominal coverage | H | 90° |
| V | 60° | |
| Components | LF | Diameter:10' cone, Voice Coil:2', Magnet:Ferrite |
| HF | Diaphragm:1.4', Type: 1' throat compression driver, Magnet:Ferrite | |
| Crossover | FIR-X tuning™ (linear phase FIR filter) | |
| Output power | Dynamic:1100W (LF: 950W HF: 150W) / Continuous: 700W (LF: 600W HF: 100W) | |
| Maximum output level (1m; on axis) | 131dB SPL | |
| I/O connectors | INPUT: XLR-3-31 x1 , INPUT2: Phone x2, INPUT3: RCA PIN x 2, THRU: XLR3-32 x 1 (Parallel with INPUT 1 ), LINK OUT: XLR x 1 | |
| Processors | D-CONTOUR: FOH/MAIN, MONITOR, OFF | |
| Power requirements | 100V - 240V, 50Hz/60Hz | |
| Power consumption | 90W | |
| Flying and mounting hardware | Top x2, Rear x1 (Fits for M8 x 15mm eyebolts) | |
| Pole socket | 35mm with 2-way features (0 or 7 degrees) | |
| Dimensions | W | 305mm (12') |
| H | 502mm (19 6/8') | |
| D | 310mm (12 2/8') | |
| Net weight | 14.6kg (32.2lbs) | |
| Accessories | UB-DXR10 (U-barcket) | |
| Others | Material: ABS (Matte Finish, Black) | |
(169).jpg)
US 15809 
GB 12391 
CA 9726 
AU 9685 
IE 5271 
BR 2857 
NZ 1808 
IN 1224 
