No More Big Gaps
-- Selleys No More Big Gaps is an expanding foam, which cures into a semi-rigid closed-cell foam,
making it ideal for filling large and irregular holes or cavities such as around pipes.

Features
-- Fast curing. The surface will be tack-free within 15 minutes after application. A 3cm to 5cm deep application will be fully cured in approximately 4 hours.
-- Expands up to 2.5 times to fill those irregular and large holes around the home. The expansion will vary depending on the conditions and confinement of the space.
-- An excellent insulator, and also blocks pests, noise, and birds.
-- Convenient aerosol can no mixing required simply spray into the gaps.
-- Cured products can be cut, trimmed, sanded, and painted.
-- Suitable for interior and exterior use.
Superior adhesion to a broad range of surfaces, resulting in a lasting finish.
CFC-free ozone-friendly hydrocarbon propellant.

Ideal For
-- Gaps between the window and door frames and the wall, along skirting boards, around cornices, in corners, or between walls and ceilings, concretes, tiles, fiber cement boards, and woods.

-- Ensure the surface is clean, dry, and free from dust, grease, flaking/powdery paint, and old or crumbling caulk. For best performance, moisten surfaces by spraying with water (a plant sprayer is ideal).
-- Wear gloves and eye protection. Product is difficult to remove from skin and clothing.
-- Shake can vigorously for 60 seconds.
-- Screw nozzle onto can valve. Do not overtighten.
-- Turn the can upside down and gently apply pressure on the trigger to extrude the product. Vary the pressure to control product flow. Fill half the space. Do not overfill as the product will expand up to 2.5 times its volume over several hours.
-- For extended usage continue to shake the can from time to time.
-- Clean up any overspray and spillage immediately with a dry cloth. Acetone/nail polish remover will assist.
-- The product will be tack-free in 15 minutes and fully cured in approximately 4 hours. Once cured, the product can be cut back with a sharp knife or sanded with a sanding block.

Limitations:
Not suitable for use as a fire barrier.
Not suitable for the manufacture of floatation aids or life-saving devices.
Will not block rats and mice where access holes are in current use.
*Not for use on polyethylene, polypropylene, Teflon, silicone, or polystyrene.

OUR WEBSITE IS http://www.velocitydiy.com
CONTACT NUMBER IS +6014-9891223