If you are renovating, installing flooring, and facing an uneven ground surface that requires Self Leveling floor leveling, the following information is crucial!
Key Points About Using Mapei for Self Leveling
During the Self Leveling process, Mapei is used as the primary material. However, if the quality of Mapei or the application method is improper, it can affect the final results, leading to cracks in the leveling layer and reducing its durability over time.
Common Issues & Precautions :
Water Ratio Control :
- When using Mapei for leveling, the water ratio must strictly follow the standard mix. Excessive water can weaken the stability of the leveling layer, causing cracks or warping after installation.
Coverage & Thickness :
- One 25kg bag of Mapei can cover 35-40 square feet (approximately 3.2-3.7 square meters).
- The thickness should not exceed 4mm. If it goes beyond the standard, it may affect leveling performance and cause detachment of the bottom layer over time.
Avoiding Installation Mistakes :
Excessive coverage area:
- If a 25kg bag of Mapei is spread over too large an area, it may reduce its hardness and durability.
Thickness beyond standard:
- An overly thick leveling layer may compromise floor stability, leading to cracks or sinking in the long run.
Ensure the Best Results, If you have any questions, feel free to contact us to learn more about Self Leveling installation details!
Main Office
QF Greentech Sdn Bhd 202401025416 (1571265-V)
No.2, Jalan PJS 5/26, PJS 5 Bandar Sunway, 46150 Petaling Jaya, Selangor, Malaysia.