PROCEQ Equotip 550 UCI - For fine-grained material and heat-treated surfaces

• Pc Software: Equotip Link allowing direct reporting and custom reports
• Memory: Internal 8 GB flash memory (> 1’000’000 measurements)

• Display: 7” color rugged touchscreen unit (800 x 480 pixels) with dual core processor
• Native Scale: HV (UCI)
• Available Scales: HB, HV, HRA, HRB, HRC, HR15N, HR15T, MPA
• Available Probes: UCI (Adjustable load HV1, HV5 and HV10)
• Combination With Other Methods: Leeb, Portable Rockwell
• Average Roughness Ra (µm / µinch): 12.5 / 500
• Minimum Mass (kg / lbs): 0.3 / 0.66
• Minimum Thickness (mm / inch): 5 / 0.2
• Instrument Firmware
  Automatic compensation for impact direction
  Personalized user profiles and views
  Integration in automated testing environments (incl. remote control)
  11 Languages and timezones
  Measurement wizards
  Custom curve wizard
  Combined method wizard
  User guidance features
  Custom report features
  One-step calibration
  metric and imperial units support
  Profile view
  Heat Affected Zone (HAZ) line mapping
• Connections: USB host / device and Ethernet
• Measuring Range: 20 - 2000 HV
• Verification according to: ASTM A1038, DIN 50159, GB/T 34205-2017, custom method, combined method
• Protection: IP54, fully rugged with shock-absorbing casing
• Custom conversion curves: Yes, 1-point shift, 2-point, polynomial
• Coefficient of variation: Significantly lower than the limits set in DIN 50159, ASTM A1038 & GB-T 34205-2017

• The leading Ultrasonic Contact Impedance measurement system with advanced capabilities
•  Unmatched versatility owed to HV1, HV5, and HV10 test loads in a single probe
•  Patented adjustable test load for higher accuracy on a wide range of applications
•  Powerful measurement device on the market packed in a rugged chassis

• Ultrasonic Inspection of Welds
• Ultrasonic Inspection of Cast and Forged Metals
• Heat-treated surfaces

• Efficiency - Efficiency to the power of 2 thanks to three loads in one single probe HV1, HV5, and HV10 and possible combination with Portable Rockwell and Leeb in one device.
• Productivity - Features with wizards, user guidance, personalised views, and on-screen feedback to reduce measurement inaccuracies that can be caused by the operator.
• User Experience - User guidance, smart material, and probe selection wizards, and ready-to-go reports through a powerful built-in reporting feature facilitate even short measurement campaign.

• Arrow, click names to download Standards & GuidelinesASTM A 1038
• Arrow, click names to download Standards & GuidelinesASTM E 140
• Arrow, click names to download Standards & GuidelinesDIN 50159
• Arrow, click names to download Standards & GuidelinesGB/T 34205-2017
• Arrow, click names to download Standards & GuidelinesISO 18265

• ArrowASME CRTD-91
• ArrowDGZfP Guideline MC 1
• ArrowNordtest Technical Reports 424-1, 424-2, 424-3
• ArrowVDI / VDE Guideline 2616 Paper 1

• Current Sales Flyer - Equotip 550 UCI
• Equotip Application Booklet
• Equotip Additional Information
• Equotip 550 Quick Start Guide
• Equotip 550 Certificates
• Equotip 550 incl. Leeb U Operating Instructions
• Quick Charger Operating Instructions
• Conversion Curve Technical Note Equotip 550 (EN)

• The 3 Most Reliable Portable Hardness Testing Methods
• Investigating the Strength and Condition of Rocky Coastal Platforms and Maritime Concrete

Adjustable test load and a rugged touchscreen with enhanced software and analysis features

Efficiency
Efficiency to the power of 2 thanks to three loads in one single probe HV1, HV5, and HV10 and possible combination with Portable Rockwell and Leeb in one device.

Productivity
Features with wizards, user guidance, personalised views, and on-screen feedback to reduce measurement inaccuracies that can be caused by the operator.

User Experience
User guidance, smart material, and probe selection wizards, and ready-to-go reports through a powerful built-in reporting feature facilitate even short measurement campaign.