TEXAS GENERATOR
Generator: 100KVA
Texas 100kva Generator Set Cummins Engine
| SPECIFICATION | ||||||
| Voltage: 400v | Phase: 3 | Power factor: 0.8 | Standby power: 110kVA | |||
| Hz: 50Hz | Current: 144A | Prime power: 100kVA | ||||
| ALTERNATOR DATA | ||||||
| Prime power | 100KVA | |||||
| Frequency/speed | 50HZ/1500rpm | |||||
| Exciter type | Single bearing, Brushless, Self-excited. | |||||
| Power factor | 0.8 | |||||
| Voltage adjust range | ≥5% AVR | |||||
| Insulation Grade | H | |||||
| Pole No. | 4 | |||||
| Protection Grade | IP23 | |||||
| Phase / wire | 3 phase 4 wires | |||||
| ENGINE DATA | ||||||
| Manufacturer/Model | Cummins 6BT5.9-G2 | |||||
| No. Of Cylinder | 6 Cylinders | |||||
| Cycle | 4 Stroke | |||||
| Aspiration | Turbocharged and After Air cooled | |||||
| Combustion System | direct Injection | |||||
| Bore×Stroke | 102mm x120mm | |||||
| Displacement | 5.9 L | |||||
| Prime Power/Speed | 92KW @ 1500rpm | |||||
| Standby Power/Speed | 110KW @ 1500rpm | |||||
| Speed Governor | Electrical | |||||
| Cooling System | Forced water cooling cycle | |||||
| Steady speed droop | ≤1% | |||||
| Starter Motor | DC24V | |||||
| WEIGHT AND DIMENSION | ||||||
| Size Genset Open Type | 2250*800*1300mm | |||||
| Weight Genset Open Type | 950KG | |||||
| Size Genset Silent Type | 2800*1050*1600 | |||||
| Weight Genset Silent Type | 1250KG with 160L base fuel tank | |||||
| FUEL SYSTEM | ||||||
| Fuel Type | Diesel | |||||
| Fuel Consumption at 100% Load | 210gram/kw.h | |||||
| LUBE OIL SYSTEM | ||||||
| Total lubrication system capacity | 16L | |||||
| Lube Oil Type | CD15W Class and Above | |||||
| COOLANT SYSTEM | ||||||
| Total Coolant Capacity | 40L | |||||
| Max Water Temperature | 104℃ | |||||
| Thermostat | 82-95℃ | |||||
US 8757 
GB 6449 
AU 5419 
CA 5411 
IE 3053 
NZ 2869 
IN 723 
SG 546 
