In order to have a complete flowmeter, please combine it with one of the following MAG transmitters:
SITRANS FM MAG 5000: Cost efficient transmitter, accuracy of + 0.4 % of flow rate
SITRANS FM MAG 6000: Bus communication, batch function and accuracy of + 0.2 % of flow rate
SITRANS FM MAG 6000 I: Alu enclosure, Ex approvals, bus communication, batch function and accuracy of + 0.2 % of flow rate
The transmitter can be combined with the energy calculator SITRANS FUE950
Benefits
- Zero Up and Zero Down installation capabilities
- Lining specifically for drinking water applications requiring special approvals
- Increased low flow accuracy for water leak detection (NBR or EPDM lining)
- Suitable for underground installation and permanent immersion (IP68) or underwater installation
- Integrated grounding electrodes - no grounding rings required for many applications
- Short delivery time
-
SITRANS FM portfolio - our integrated platform enables the flexible use of the transmitter MAG 5000 / 6000 for all products (MAG 5100 / 3100/1100):
• Unique SensorProm technology - stores critical, sensor-specific data and passes it to the transmitter. This allows a simple, flexible commissioning of the sensor.
• Plug & Play - allows easy on-site replacement and commissioning of the transmitter in just minutes
• ''Hot swapable'' - exchangeable during operation
• Mounting flexibility - compact or separate installation possible
• Validated calibration ensures accurate flow measurement. Each Siemens flowmeter is calibrated in facilities that are individually accredited to ISO / IEC 17025.
• Service and diagnostics - Designed for MAG on-site verification with traceable certification. Regular calibration of the SITRANS FM Verificator ensures accuracy in the field.
Detail
|
Meassuring range
|
0 to 10 m/s
|
|---|---|
|
Nominal sizes
|
From DN 15 to DN 2000 (1'' to 78'') |
|
Accuracy
|
0.2 % ±2.5 mm/s |
|
Operating pressure
|
Max. 16 bar (Max. 150 psi) |
|
Ambient temperature
|
From -40 to 70 °C (-40 to 158 °F) |
|
Medium tempreature
|
From -10 to 70 °C (14 to 158 °F) |
|
Liners
|
EPDM NBR hard rubber Ebonite hard rubber |
|
Electrodes
|
Hastelloy C-276 Built-in grounding electrodes |
|
Material
|
Carbon steel, with corrosion resistant two-component epoxy coating |
|
Drinking water wpprovals
|
EPDM: WRAS, NSF/ANSI Standard 61, DVGW 270, ACS and BelgAqua NBR: NSF/ANSI Standard 61, WRAS Ebonite: WRAS |
|
Custody transfer approvals
|
OILM R 49 MI-001 PTB K7.2 (Germany) BEV OE12/C040 (Austria) |
|
General approval
|
MCERTS Sira Certificate No. MC080136/00
|
Application examples: water abstraction, water distribution network, waste water and as custody transfer water meter or cooling meter.
US 17584 
GB 13431 
CA 11352 
AU 9256 
IE 4308 
BR 3006 
NZ 2226 
MX 454 
