SIMEX STI-94

The STI-94 tachometers are designed to control rotational or linear speed of moving objects. The device is also able to measure frequency. As an additional advantage the device can convert the rotational / linear speed into inverse values, and to display the single revolution period or process duration. The REL / OC control outputs can be programmed depending on the instantaneous value of rotational speed. Additionally the counter may be equipped with analogue outputs, according to the customer selection: active current output, passive isolated current output or active voltage output. The counter can be configured with the local keyboard or free S-Config software via the RS-485 communication port.
 

Number of inputs	1
Input type	pulse
Input levels	low: 0...1V; high: 10...30V
Input frequency	1,5...50 kHz
Output type	depends on configuration: relay I=1A, U=30V DC/250V AC (cosø=1) Open Collector: I=30 mA, U=30V DC, P=100 mW 0/4...20 mA: active current, operating range 0...24 mA max., load resistance 700 Ω max., resolution 13 bit 4...20 mA: passive current, isolated, operating range 2,8...24 mA max., load resistance 600 Ω@24VDC, resolution 13 bit 0/1...5V, 0/2...10V: active voltage, operating range 0...11V max., load resistance min. 2000 Ω, resolution 13 bit
Measurement unit	revolutions per second, per minute, per hour
Measurement method	electrical, pulse
Power supply	16...35V AC, 19...50V DC 85..260V AC/DC
Display	LED, 6 x 13 mm, red
Communication Interface	RS-485 / Modbus RTU
Transmission parameters	1200...115200 bit/s, 8N1 / 8N2
Operating temperature	0...+50°C -20…+50°C
Protection class	IP 20 (case and connection clips) IP 65 (front) optional integrated frame for panel cut-out sealing
Case material	NORYL-GFN2S E1
Mounting	panel
Case dimensions	96 x 48 x 100 mm