Check and test machine condition, drum removed and parts loosen
检查并测试机器状况,以了解内部是否有问题。
Pre-rinsing
事前冲洗
High-pressure remove dirt and debris on the surface
以高压水柱去除表面上的污垢和碎屑。
1st disinfection
第一轮消毒
Hot system (>90 - 125°C) to loosen fine dirt and debris. Disinfection up to 95% of germs and viruses eliminate.
以热系统(> 90-125°C)清除细小的污垢和碎屑。可以消除高达95%的细菌和病毒。
Main clean
主要清洗工作
Special design machine cleaning provides 💯 % fine dirts and debris removed from the surface.
以特殊设计的机器清洁洗衣机内部,让所有的细微污垢和碎屑从表面上100%清除。
Rinse
冲水洗净
Complete rising will large amounts of water to remove fine dirts and debris.
使用大量的清水冲洗内部,清除细小的污垢和碎屑。
Drying
烘干
Remove all moisture.
除去所有的水分。
Disinfection coating
消毒涂层
Coating and kill germs and viruses with disinfectant with effect up to 99.999%
使用消毒剂涂层以便杀死细菌和病毒,效果高达99.999%
Installing and testing
组装和测试
Install and test the machine before buy off by customers.
将洗衣机组装好和测试机器,确保归还给客户时状态完好。
Main Office
PRO CLEAN WASHING MACHINE PG0422237-A
46-G-2, Greenlane Height Block A, Jalan Besi, 11600 Penang, Malaysia.