The special dispensing machine for hot melt adhesive is suitable for the application of mobile phones, tablet computers and other electronic products. It is equipped with temperature control system and adopts double zone heating to eliminate uneven heating, so as to ensure stable glue delivery. All brands of structural adhesive can be used.
With Y&D6200 hot melt glue high-speed injection valve, dispensing is also known as hot melt glue sprayer.
Basic parameters:
Display mode: LCD
Edit mode: teaching box
Input power supply: full voltage AC90 ~ 260V 320W
Working environment temperature: 0 ~ 40 ¡æ
Working environment humidity: 20 ~ 90% without condensation
Heating temperature of needle cylinder: 0 ~ 180 ¡æ (± 1 ¡æ)
Applicable syringe: 30cc
Performance parameters:
Item | Y&D7300N | Y&D7400N | Y&D7500N |
X/Y/Z working area (mm) | 300/300/100 | 400/400/100 | 500/500/100 |
Max Load Y/Z Axis | 11.0kg / 6.0kg | ||
Speed X&Y/Z (mm/sec) | 800/350 | ||
Repeatability Positioning Accutacy | +/- 0.01mm / axis | ||
Resolution | 0.01mm/axis | ||
Data memory | Min 100 programs, 4000 points/program | ||
Data storage | CF card | ||
Program Display | LCD | ||
Operation system | PTP (point to point) & CP (continuous path) | ||
Interpolation linear/circular | 3 axis | ||
Program method | Teach pendant | ||
I/O signals | 8 inputs / 8 outputs | ||
External interface | RS232 | ||
Power supply | AC 90~260V 320W | ||
Working Relative Humidity | 20-90% no condensation | ||
Operating temperature | 0~40°C | ||
Motor system | Mirco Stepping Motor | ||
Syringe heating temp | 0-180°C(+/-1°C) | ||
Applicable Syringe | 30CC |