FABP is a newly introduced plasma marker of acute myocardial infarction (AMI). The plasma kinetics of FABP (15kD) closely resemble those of myoglobin in that elevated plasma concentrations are found within 2 hours after AMI and return to normal generally within 18 to 24 hours. But the concentration of FABP in the skeletal muscle is 20 times lower than in cardiac tissue (for myoglobin the same content for cardiac and skeletal tissue), that makes FABP to be more cardiac specific than myoglobin. This makes FABP a useful biochemical marker for the early assessment or exclusion of AMI. FABP also appears to be a useful plasma marker for the estimation of myocardial infarct size.
FABP is suitable for use as a standard in immunoassay for early detection of acute myocardial infarction, immunogen for antisera production, mass FABP standard, FABP biochemical and immunochemical studies, tracer for iodination.
【DIRECTIONS FOR USE】
Allow the test, specimen, buffer and/or controls to reach room temperature (15-30°C) prior to testing.
1. Bring the pouch to room temperature before opening it. Remove the test cassette from the sealed pouch and use it within one hour.
2. Place the cassette on a clean and level surface.
For Serum or Plasma specimen:
• Hold the dropper vertically and transfer2 drops of serum or plasma (approximately 50 µL) to the specimen area, then add 1 drops of buffer (approximately 40 µL), and start the timer. See illustration below.
For Venipuncture Whole Blood specimen:
• Hold the dropper vertically and transfer 2 drops of whole blood (approximately 50 µL) to the specimen area, then add 1 drops of buffer (approximately 40 µL), and start the timer. See illustration below.
For Fingerstick Whole Blood specimen:
• To use a capillary tube: Fill the capillary tube and transfer approximately 50 µL of fingerstick whole blood specimen to the specimen area of test cassette, then add 1 drop of buffer (approximately 40 µL) and start the timer. See illustration below.
• To use hanging drops: Allow 2 hanging drops of fingerstick whole blood specimen (approximately 50 µL) to fall into the specimen area of test cassette, then add 1 drop of buffer
(approximately 40 µL) and start the timer. See illustration below.
3. Wait for the colored line(s) to appear. Read results at 10 minutes. Do not interpret the result after 20 minutes.
|
Cat. No. |
Product Description |
Specimen |
Format |
Kit Size |
Cut-Off |
Status |
|
CFA-402 |
H-FABP Rapid Test Cassette |
WB/S/P |
Cassette |
10 T |
8 ng/mL |
CE |
US 8458 
GB 6508 
CA 5409 
AU 4654 
IE 3747 
NZ 1353 
RU 467 
IN 410 
