MULTICOMP - Surface Resistance/ Resistivity Meter

Brand: Multi Comp Pro
Part No: MP005768


Product Descriptions:

The Multicomp Pro MP005768 surface resistance meter has been designed to measure both surface resistance and resistance to ground. To measure surface material place the meter on the area to be tested and press the test button. For measuring resistance to ground, place the ground lead into the earth leakage socket, connect the crocodile clip to the area to be tested and press the button.

The meter will test conductive, static dissipative and insulative surfaces using two parallel bars set to give Ohms per square readings. Conductive is indicated by green LEDs from 10³ - 10⁵, static dissipative by yellow LEDs from 10⁶ - 10¹¹ and insulative by re LEDs 10¹²⁺.


Product Features:

• Tests conductive, static dissipative and insulative surfaces using two parallel bars
• Conductive is indicated by green LEDs
• Static dissipative by yellow LEDS from 106-1011
• Insulative by red LEDs from 1012+
• Operating temperature range from 5-19°C
• Requires 9V, PP3 battery (not supplied)
• Test Voltage of 9V
• Accuracy of -/+ 10%
• Repeatability of -/+ 5%
• 6oz device weight

Technical Specifications:

Technical Specification	Technical Data
Decade Changeover	+/- ½ Decade on a Logarithmic Scale (3.16 x 10n)
Resolution	1 Decade
Accuracy	+/- ½ Decade
Temperature	Operating	5°C to 49°C
	Storage	-15°C to +60°C
Power	9V PP3 Alkaline Battery
Test Voltage	Nominal 9V
Accuracy	+/- 10%
Repeatability	+/- 5%
Weight	6 Ounces