SPORE™ CHLORINATED finger cots are manufactured from 100% pure natural rubber latex.
Specifications
| Specified | S15 | M18 |
| Internal Diameter (mm) | 15 | 18 |
| Thickness (mm) | 0.1 ± 0.02 | |
| Length (mm) Unroll, Roll, Cut | 63 ± 2 | |
|
Physical Test (ASTM D412) Elongation Tensile Strength |
Min 700 % Min 25 Mpa |
|
Product range and packaging specifications
| Size | Thickness (mm) | Type | Packaging | |
| S15 | Rough Surface | Unroll / Cut / Roll | 1440pcs x 20bags per carton | |
| M18 | Rough Surface | Unroll / Cut / Roll | ||
Functions
- To protect fingers of workers.
- To prevent contamination caused by direct contact with fingers.
- Rough surface provides better grip and anti-slip properties.
-
SPORE™ “cut” type
- The rim of the cots are cut off to reduce finger fatigues and discomfort. -
SPORE™ “unroll” type
- Beading provides an easy way to wear or remove from the fingers. -
SPORE™ “roll” type
- Pre-rolled, it is very easy to wear or remove from the fingers
Application
- Electronics industries
- Mechantronics industries
- Optotronics industries
Recommended Storage Conditions.
- Store indoor at room temperature below 28ºC.
- Avoid direct exposure to sunlight.
- Once open, use immediately
Shelf life.
Approximately 9 months.
If finger cots contaminated, please dispose as Scheduled Wastes. Finger cot is bio-degradable type.
US 9443 
GB 6770 
CA 6125 
AU 5970 
IE 3046 
NZ 2850 
IN 769 
SG 508 
