Multi-purpose watertight IP68 probe -50 to +200°C.
The probe is designed to measure the temperature of gaseous and liquid substances.
The maximum temperature range of use of the sensors is -50 to 200 °C. Used type of lead-in cable has silicone insulation and shielding.
The probe meet the ingress protection of IP 68 (1 bar) in accordance with EN 60 529 and is designed for measuring the temperature below the surface of water for continuous immersion at a depth of up to 5 m.
The method of use must be chosen with regard to the temperature and chemical resistance of the case and supply cable.
TECHNICAL DATA
MEASURED VALUE
Temperature
TEMPERATURE SENSOR
Measuring range -50 to +200 °C
Accuracy ± (0.15 + 0.002 t) at °C
Accuracy class A
Time response t0.5 <12 s (in flowing water at > 0.2 m/s)
Type of sensing element Pt1000
Temperature coefficient 3850 ppm / °C
GENERAL TECHNICAL DATA
Wire connection 2-wire connection
Material of the case stainless steel DIN 1.4404
Dimensions of the case length 60 mm;
diameter 6 ± 0.1 mm
diameter 6 ± 0.1 mm
Lead-in cable silicone shielded
Length of lead-in cable 1 meter
Connector ELKA
IP protection IP68
Warranty 30 months
US 16941 
GB 10895 
CA 9424 
AU 5934 
IE 1623 
NZ 1231 
SG 1191 
IN 1021 
