Penang RAY26 Reflex Array Photoelectric sensors - Detection sensors - SICK Agent from Truserv Technologies (M) Sdn Bhd

Photoelectric sensor with light array for detecting flat objects
Photoelectric sensors from the RAY26 Reflex Array product family enable reliable object detection of flat objects as well as fast commissioning. When combined with a reflector, the photoelectric sensors also detect small, flat, transparent or uneven objects from a size of 3 mm. Within a 55 mm-high uniform light array, the sensors detect the leading edge of the respective object for this purpose. This means that even perforated objects can be reliably detected without multiple switching.

RAY26 Reflex Array AT A GLANCE
Benefits
-Reduce overall costs by up to 50% compared to solutions with separate sender and receiver housings
-Reliable, position-independent detection of very flat objects
-Productivity increase thanks to reliable object detection (regardless of object property) and prevention of multiple switching (for perforated, non-uniform objects)
-Quick and easy optical alignment, commissioning and monitoring
-Reduction of downtime of conveyor systems

Features
-Sender and receiver in a single housing, combined with a reflector
-Detection of objects > 1 mm or > 3, 5, 10 mm, depending on the detection height
-ASIC from SICK
-Visible uniform light array (PinPoint LED)
-AutoAdapt technology (predictive maintenance) and conveyor belt suppression

ADVANTAGES
Simple alignment and reliable object detection
The RAY26 Reflex Array photoelectric sensor has a uniform, highly visible light band. The photoelectric sensor can be aligned quickly and easily thanks to this light band. After alignment, only teach-in is needed before the sensor is ready for object detection.

Save valuable time during commissioning thanks to the quick alignment and easy adjustment of the sensor

Predictive maintenance thanks to the transmission of maintenance signals
During operation, blue LEDs indicate the degree of contamination of the sensor and reflector. The integrated IO-Link technology enables quick and reliable transmission of these maintenance signals to the controller (PLC). This means maintenance and cleaning of the sensor can be planned at an early stage, avoiding unplanned downtime.

Prevent unplanned downtime with the help of predictive maintenance

Conveyor belt suppression
Conveyor belt suppression enables gradual deactivation of the detection zone (A) right above the conveyor belt. This suppresses the interference of the conveyor belt that causes the sensor to switch during system operation.

https://youtu.be/EZ-9tcrFGmI
Conveyor belt suppression, manually

https://youtu.be/ouxHvel19Zg
Conveyor belt suppression, via IO-Link

Ensure plant availability quickly and easily with conveyor belt suppression

Ambient operation temp. max	60 °C
Ambient operation temp. min	-30, -40 °C
Cable material detail	PVC
Cable material	plastic
Certificate	MAR declaration of conformity, EAC certificate / DoC, Photobiological safety (DIN EN 62471) certificate, cULus certificate, China-RoHS, EU declaration of conformity, UK declaration of conformity, ECOLAB certificate, ACMA declaration of conformity
Communication Interface detail	COM2 (38,4 kBaud)
Communication interface	IO-Link, -
Connection type Detail	Cable with M12 male connector, 4-pin, male connector M12, 4-pin, Cable, 4-wire
Connection type	cable with male connector, cable, male connector
Current consumption	35 mA, 40 mA, 25 mA
Detection height	10 mm, 20 mm, 55 mm, 24 mm
Dimension (depth)	54.2, 53.3 mm
Dimension (length)	80, 82.5 mm
Dimension (width)	24.6 mm
Enclosure rating	IP67, IP66
Functional principle detail	Without reflector minimum distance (autocollimation/coaxial optics), Reflex Array
Functional principle	Photoelectric retro-reflective sensor
Housing material detail	ABS, VISTAL
Housing material	plastic
Housing	rectangular
Length of cable	2 m, 270 mm
Light sender detail	LED
Light source	LED
Light spot size	10 mm x 9 mm (1 m), 24 mm x 9 mm (1 m), 55 mm x 9 mm (1 m)
MTTFD	976 a, 878 a, 709 a, 1001 a
Object distance (max.)	2000, 3000, 4500, 1500, 3500 mm
Object distance (min.)	0 mm
Output function	Pin 4 / black (QL1 / C): PNP normally closed (light switching), IO-Link, factory setting: Pin 2 / white: NPN normally closed (light switching), PNP normally open (dark switching), Complementary, Pin 4 / black (QL1 / C): NPN normally open (dark switching), PNP normally closed (light switching), IO-Link, factory setting: Pin 2 / white (MF): NPN normally open (dark switching), PNP normally closed (light switching), Pin 4 / black (QL1 / C): NPN normally closed (light switching), PNP normally open (dark switching), IO-Link, Pin 4 / black: NPN normally open (dark switching), PNP normally closed (light switching), factory setting: Pin 2 / white (MF): PNP normally open (dark switching), factory setting: pin 2 / white: input, teach-in, Pin 4 / black: NPN normally closed (light switching), PNP normally open (dark switching), factory setting: Pin 2 / white (MF): NPN normally closed (light switching), PNP normally open (dark switching)
Output	Simple switching output
Product family	RAY26 Reflex Array
Product segment	Photoelectric sensors
Response time	≤ 2.5 ms, ≤ 500 s, ≤ 3 ms
Sensing range max.	2 ... 4 m, 4 ... 7 m, 1 ... 2 m
Sensing range	4.5 m, 1.5 m, 3.5 m, 2 m, 3 m
Signal voltage NPN HIGH/LOW	approx. VS / < 2.5 V
Signal voltage PNP HIGH/LOW	approx. VS 2.5 V / 0 V
Smallest detectable object (MDO) typ.	2, 3, 12, 8, 5, 1, 10, 16 mm
Smart Sensor	Smart Task, efficient communication, Enhanced Sensing, diagnosis
Smart Task name	base logics
Special applications	Detecting uneven, shiny objects, Detecting transparent objects, Detecting flat objects, Detecting perforated objects, Detecting objects with position tolerances
Special feature	light band
Special features	detection height 45 mm, detection height 30 mm, detection height 10 mm, detection height 24 mm, 1 x RAY26 1221060, with cable 6027559, mounting bracket 2123991 with screws and washers, PL80A 1003865, premounted on mounting bracket 2123993, 4 x screws, slot nuts for attachment to ITEM profile, 1 x RAY26 1221060, mounting bracket 2123991 with screws and washers, PL80A 1003865, premounted on mounting bracket 2123993, 4 x screws, slot nuts for attachment to ITEM profile
Sub product family	WL27-3 Reflex Array, RAY26
Switching frequency	170 Hz, 1000 Hz, 200 Hz
Switching mode selector	Switching mode selector
Switching mode	Light/dark switching
Switching output detail	push-pull: PNP/NPN, PNP, NPN
Switching output	push-pull, NPN, PNP
Task	Detecting - Standard objects, Detecting - Perforated objects, Detecting - Transparent objects
Type of light	visible red light
Voltage type	DC
Weight	100 g, 80 g, 130 g

Your Name *
Your Company Name
Your Email *
Your Contact Number *
Subject *
Message *
Captcha *

Full Name *
Email *
Contact Number *
Company Name
Company Address
Subject *
How can we help you? *

Penang - Agent RAY26 Reflex Array

RAY26 Reflex Array in Penang