BT200-03 3hp homogenizer c/w Electrical Rope Hoist Trolley Stand

BT200 Batch Homogenizer - is high-performance dispersing machine for the production of emulsions and suspensions in batch operations c/w powder suction capability. Using the rotor-stator principle, it is best suited for applications that cannot be accomplished using conventional stirring methods. The machine is capable of processing highly abrasive products and media with a viscosity of up to 80.000 mPas. 

Features & Specification

Working Volume (ml)	100 – 5,000 l	Operating Environment	0-175°C, 95% rel. humidity
Motor Power(kW)	2.2 -37 - 3 phase  Normal or Ex-Proof	Protection class	IP55
Voltage/ Frequency	380-450V / 50-60Hz	Certified standards	89/336EEC,72/023/EEC,        EMC acc. IEC/EN 61000-6-2 / 3,         Safety acc. IEC/EN 61010-2-51
Working Temperature and Pressure Range	Up to 160° C 15 bar	Seal type	Lip Seal (150° C ) or Double Acting Mechanical Seal (160° C and 15 bar)
Speed range (rpm)	1,000 – 3,000	Warranty	2 years – spare part due to manufacturing defects
Speed control type	220V/50-60Hz frequency inverter control : 0-6000 rpm	Sterilization Method:	All
Lifting system (optional)	Motorized S/S 304 or Mild Steel epoxy coated	pH Range:	2-13
Standard Shaft Length ( mm)	750 - 1650	Suitable for solvents & abrasive substances::	YES
Weight (kg)	450-700	Ultimate Fineness, Suspensions&Emulsion: (µm)                Max Viscosity (mPa)	Suspension: 10-15           Emulsion  : 1-10                                                                                             80,00

 

Machine	Power	Batch size	Induction rate
			from bags	from BigBags
VT300-S1	4 kW	beliebig	2 -5 kg/min		7 -12 kg/min
VT300-S2	7.5kW	beliebig	5-8 kg/min		15-19 kg/min
VT300-S3	15-18kW	beliebig	10-15 kg/min		18-24 kg/min
VT300-S4	37 kW	beliebig	20 - 30 kg/min			30 - 40 kg/min
VT300-S5	37 - 45 kW	beliebig	25 - 40 kg/min				33 - 50 kg/min
BT200-S3	2,2 kW	100 - 250 litres	4 - 5 kg/min
BT200-S10	7,5 kW	800 - 1.500 litres	12 - 16 kg/min
BT200-S25	18,0 kW	2.000 - 3.000 litres	18 - 22 kg/min
BT200-30	22,0 kW	3.000 - 4.000 litres	20 - 25 kg/min

 

 

Molecular/Colloidal Dissolving
Below is a list of some typical dissolving applications, and which Dyna-Ken mixer provides the best solution for Dyes,Crystal powders,Salts,Sugar,Detergents,Binding agents,Hydrocolloids,Elastomers,Resins,Thixotropic agents

Powder-Liquid Incorporation
Incorporating powders into liquids offers many challenges to processors. The powders may be difficult to wet out, and may produce fish-eyes if not effectively dispersed into the liquid. The powders are often added to a vessel by dumping bags into the top, creating a plume of dust and creating a possible health hazard. Eductors, blenders, and other powder addition equipment will often clog, or not perform as well as desired, or the system is too complex to clean and maintain. dyna-Ken mixer provides the best solution for :Xanthan gum,Starches,Fumed silica,Milk solids,Carbopol,Carbomel,Sugar,Cellulose,Xanthan Gum,Pigments,Pectin,Clays

Suspending -Wet Milling (Solid-Liquid)
Suspending is dispersing of solid particles in a liquid. It is often desirable to reduce the particle size of the solids in conjunction with dispersing, and this is often referred to as wet milling. With the use of our mixer and sufficient energy input, the final product will become homogenized best solution for Carbon black,Titanium Dioxide,Seeds,Polishing agents,Clays,Graphite,Crystals,Catalytic agents,Sulfur,Slurries,Metal Oxides

Emulsifying (Liquid-Liquid Systems)
Emulsifying is the process of dispersing one liquid in a second immiscible liquid, such as oil dispersed in water. A colloidal suspension is a system comprising particles dispersed in a liquid that do not settle out of solution due to their extremely small size of less than one micrometer for :Margarine,Ice cream,Proteins,Creams and Lotions,Salad dressings and sauces,Micro-encapsulations,Paraffin,Cosmetics,Mineral oils,Pesticides and herbicides,Waxes