This high accuracy instrument if fully equipped to meet most magnetic measuring application needs. Bell’s dynamic probe correcting software increases the 8030 measurement capabilities to make versatile magnetic measuring tool in the world.
Features:
- TFT Color LCD Display with Backlighting
- WVGA, 600 x 480 pixels
- Over 40 standard probes available
- Three channels
- Automatic probe coefficient correction
- Displays in Gauss, Tesla, amp/meter or Oe
- Relative mode
- Fully menu-driven for easy operation
- Auto zero and auto calibration
- IEEE-488, RS-232, Ethernet RJ-45 and USB interface
- CE-compliant
- Manufactured to IS0 9000 standards
Ranges *Low field probe † High field probe |
300mG (30μT)* 3kG(300mT) 3G (300μT)* 30kG (3T) 30G (3mT) 300kG(30T)† 300G (3OmT) |
|
Resolution | 1 μG (0.1nT) to 1G (0.1mT) {Dependent on Probe Type Used} | |
Accuracy (Displayed reading) |
DC basic AC basic |
±0.05% of reading ±2% of reading |
Frequency range |
DC mode AC mode |
dc to 250Hz 20Hz to 50kHz |
Accuracy (Corrected analog output) |
DC basic AC basic Frequency range |
±0.1% of range ±2% of range dc to 500Hz |
Frequency range (Uncorrected analog output) |
DC mode AC mode |
dc to 100Hz 10Hz to 50kHz |
Analog output |
Output voltage Source impedance Connector |
±3V FS. or ±10V F.S. or adjustable from 0.1 – 9.9V <100 ohms Standard female BNC |
Additional influences | Temperature coefficient | ±(0.02% of reading ±1 count)/°C |
Temperature range |
Operating Storage |
0°C to +50°C -20°C to +60°C |
Front panel display | WVGA, 600 x 480 pixels, TFT Color LCD Display with Backlighting. (6.5" diagonal viewing area) | |
Communication ports |
RS-232 Baud rate IEEE-488 Protocol Protocol Ethernet USB |
Standard 9-pin female "D" connector 300,1200,2400,4800,9600,19200,38400, 57600,115200 bits/sec Standard 24-pin GPIB connector Protocol IEEE-1987.2 and SCPI-1999 IEEE-802.3u Data Link Layer & TCP/IP Transport & Network Layer Standard RJ-45 connector Version 1.1 full speed |
Power |
Volts: 100/120 or 220/240 Frequency: 50-60 Hz or 50-60 Hz Current: 1.O A (max) or 0.5 A (max) |