This extra wide bearing is used primarily used by White Industries in their rear hubs. The extra wide design greatly reduces flex in axle of the rear hub. The Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD-15 with ceramic or stainless balls. Enduro's bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements.
WHICH BEARING TO CHOOSE?
3802W | Abec-3
CXD 3802W | XD-15 the ultimate upgrade
WHICH BEARING TO CHOOSE?
3802W | Abec-3
- Deep groove design races
- Grade 10 balls (high carbon chromium steel)
- Fill with high pressure water proof grease
- Static load: 564lbf / 2.51kN
- Weight: 10.5g
CXD 3802W | XD-15 the ultimate upgrade
The most impressive feature of XD-15 ceramic-hybrid bearings is, unlike other bearings, they only get better with time and use. As the bearings wear-in, the super-hard ceramic balls actually make the XD-15 races even smoother. So, when compared to other ceramic-hybrid bearings on the market that claim speed and power advantages on day one, Enduro XD-15 bearings not only provide the same initial advantages on day one, but will become faster and smoother with time and use, while the other ceramic-hybrid options will only get slower. Enduro is so confident in the performance of their XD-15 Ceramic-Hybrid bearings that they carry a limited lifetime warranty against wear and corrosion.
- Deep groove design corrosion-proof, cryogenically treated nitrogen steel races
- Grade 5 balls (Silicon-Nitride Ceramic) increase bearing life
- Fill Kluber NBU52 grease that runs smoother with time and highly resistant to being washed out
- Static load: 564lbf / 2.51kN
- Weight: 10.5g
US 14950 
GB 12494 
CA 10003 
AU 8412 
IE 5762 
BR 2272 
NZ 1713 
SG 555 
