About STARVISION G SERIES
 

	ITEM	Unit	G-XX20	G-XX25	G-XX30	G-XX35	G-XX40	G-XX45	G-XX50
Travel	X Axis	mm	6,000 - 36,000
	Y Axis	mm	2.000	2.500	3.000	3.500	4.000	4.500	5.000
	Z Axis	mm	1,000 (1,200/1,500 - opt.)
	Spindle Nose To Table Distance	mm	200-1,200 (200-1,400 / 200-1,700- opt.)
	Distance Between Column	mm	2.300	2.600	3.000	3.500	4.000	5.300	5.800
Table	Table Dimension (L)	mm	6,000 - 36,000
	Table Dimension (W)	mm	1.500	2.000	2.500	3.000	3.500	4.000	4.500
	T-Slot                         (Width x Number x Pitch)	-	28x9x200
	Max. Table Load	kg	5000 (1)
Spindle	Spindle Motor	kW	22/26
	Spindle Speed                (Gear Type)	rpm	4,200 (5,500 - opt.)
	Spindle Taper	-	BT 50 / ISO- 50 / CAT-50
Feed	Rapid Traverse (X/Y/Z)	m/min	24/12/12
	Cutting Reed-Rate	mm/min	7.000
Accuracy	Position Accuracy	mm	P0.02/2,000
	Repeatability	mm	Ps0.015/2,000
ATC	Tool Storage Capacity	pcs	32T (40/60/90/120 - opt.)
	Max. Tool Length	mm	350
	Max. Tool Weight	kg	20
	Max. Tool Zize           (Full Tools)	mm	Ø125
	Max. Tool Size             (Next Pocket Empty)	mm	Ø200
Other	Compressed Air	kg/cm2	65
	Floor Space (L) (Approx.)	mm	12,000 - 42,000 (2)
	Floor Space (W) (Approx.)	mm	7.000	7.500	8.000	8.500	9.000	9.500	10.000
	Floor Space (H) (Approx.)	mm	6.000	6.000	6.000	6.000	6.000	6.000	6.000
	Machine Weight (Approx.)	kg	70,000 (3)	75,000 (3)	80,000 (3)	85,000 (3)	90,000 (3)	95,000 (3)	100,000 (3)
•Specification is subject to change without further notice.