D/A Transducer with Scaling Function
Model Designation
7592 | - | ¡õ | - | ¡õ | - | ¡õ |
¢Ù | ¢Ú | ¢Û |
Input Specifications
Input signal |
No voltage contact or open collector, TTL level IIL ¨Q -1 mA, L = 0 - 1.0 V, H = 3.5 – 5 V |
||||||
---|---|---|---|---|---|---|---|
Polarity input (POL) |
|
||||||
Over range input (OVER) |
Polarity logic is positive (over): ¡¡“H” level Polarity logic is negative (over): ¡¡“L” level |
||||||
Hold input (HOLD) | The output is held by connecting pin with COM and making it “L” level. | ||||||
Synchronization signal (SYNC) | Make an input of synchronized negative pulse when the width is more than 1ms. It captures the pulse raising data. |
Output Specifications
Output Signal | Output Impedance | Tolerable Load Resistance |
---|---|---|
DC 0 to 10 mV | Approx. 10 Ω | More than 10 kΩ |
DC 0 to 100 mV | Approx. 100 Ω | More than 100 kΩ |
DC 0 to 1 V | Less than 0.1 Ω | More than 100 Ω |
DC 0 to 5 V | More than 500 Ω | |
DC 0 to 10 V | More than 1 kΩ | |
DC 1 to 5 V | More than 500 Ω | |
DC ±1 V | ||
DC ±5 V | More than 2.5 kΩ | |
DC 0 to 1 mA | More than 5 MΩ | 0 to 15 kΩ (During DC power: 0 to 10 kΩ) |
DC 4 to 20 mA | 0 to 7500 Ω (During DC power: 0 to 500 Ω) |
General Specifications
Allowance | ±0.15% of SPAN at 23°C | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Resolution |
|
|||||||||
Response |
Approx. 20ms(0→90%) Less than 0.2s (0→90%)in case of internal synchronization |
|||||||||
Temperature coefficient | ±150 ppm/°C | |||||||||
Output adjustment range |
ZERO£ºMore than ± 3% of SPAN SPAN£ºMore than ± 5% of SPAN |
|||||||||
Insulation resistance | Between input terminals and output terminals: DC 500 V¡¡More than 100 MΩ | |||||||||
Withstand voltage | Between all terminals and external case AC 1500 V 1min. | |||||||||
Power supply voltage |
|
|||||||||
Operating temperature | -5 to 55°C | |||||||||
Storage temperature | -20 to 70°C | |||||||||
Weight | Approx. 370 g(AC) / Approx. 210 g(DC), Socket£º Approx. 70 g |