BRD02 – MAG TRAFFIC DETECTOR
BRD02 is a traffic detector typically installed onto the exterior of barrier gate housing to detect a vehicle or human passing. It uses Frequency Modulated Continuous Wave (FMCW) to calculate the distance of any object within the detection area. The reading range can be programmed from 1m to 6m.
Description
Cutting floor to install loop coil is the most time-consuming and labour-intensive job when installing a barrier gate. What if you can save money by cutting down the installation time and labour required to install a barrier gate?
Reduce installation time to just 30 minutes
BRD02 uses frequency to detect vehicles and therefore does not require any loop coil. All you need to do is to mount it onto the barrier gate housing. A traffic detector is a faster and easier alternative to a loop detector.
Less hassle to setup
Unlike other brands that require connecting to software via a data port, the BRD02 setting can be programmed by the built-in single push button.
Safer
Other than a vehicle, a traffic detector can also auto reverse the arm when detecting a human. This is the added safety feature that is not available at loop detectors where it can only detect metal.
Strong environment adaptability
The traffic detector does not require any underground loop coil therefore its performance is not affected by rain, heat, dust, cold and harsh weather condition.
Work on any vehicle
One of the biggest challenges of loop coil is to detect big truck as there are typically higher above ground. BRD02 emitting frequency from sideway can detect vehicles of any height more accurately. The wider coverage area of BRD02 also allows it to detect small vehicles such as a motorcycle or even a bicycle.
Work on any surface
Loop coil might not work well on interlocking bricks, soiled road or metallic plates typically found in the construction site. A traffic detector will be the best alternative to a loop detector in these road conditions.