Singapore Comet H3061 temperature and humidity regulator with 230Vac/8A relays Transmitters and Regulators - Comet daripada Mobicon-Remote Electronic Pte Ltd

code: H3061
Humidistat, thermostat with two relay outputs. Outdoor, indoor use.

Relative humidity, temperature probe on a cable. Measured values are also converted to other humidity interpretation: dew point temperature, absolute humidity, specific humidity, mixing ratio, specific enthalpy.

The device is supplied with T+RH probe with 1m cable. Cable lengths 2m or 4m available optionally.

Included in delivery:

Traceable calibration certificate
Quick start manual
Free program TSensor for configuring of the transmitter

Technical parameters	Value
Output	None
Measured Value	Temperature + Relative Humidity
Construction Type	With T+RH Probe on Cable
Design	Industrial
Temperature Measuring Range	-30 to 105 °C
Relay Output	Yes 230V
Two-State Input	No
Lcd Display	Yes
PoE	No
Maximum switching voltage, current, power of relay output	250Vac, 8A
Audible alarm	from built-in beeper - switchable
Relative humidity range	0 to 100%
Accuracy of relative humidity measurement	±2.5% relative humidity from 5 to 95% at 23°C
Accuracy of temperature output	±0.4°C from -30 to +100°C ±0.4% from reading over +100°C
Available temperature units	degrees Celsius, Fahrenheit
Accuracy and range of dew point temperature output - for more details see graphs	±1.5°C at ambient temperature T<25°C and RH>30% range -60 to +80 °C
Accuracy and range of absolute humidity output	±1.5g/m3 at ambient temperature T < 25°C range 0 to 400 g/m3
Accuracy and range of specific humidity output	±2g/kg at ambient temperature T < 35°C range 0 to 550 g/kg
Accuracy and range of mixing ratio output	±2g/kg at ambient temperature T < 35°C range 0 to 995 g/kg
Accuracy and range of specific enthalpy output	±3kJ/kg at ambient temperature T < 25°C range: 0 to 995 kJ/kg
Temperature operating range	-30 to +80°C
Temperature operating range of LCD display	readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C
Temperature compensation of the humidity sensor	from -30 to +125°C
Filtering ability of sensor cover	0.025mm - filter with stainless steel mesh
IP protection	IP65 electronics, IP40 sensors
Power	110 to 240V / 50Hz to 60Hz
Current consumption	230 VAC - max. 70 mA, 115 VAC - max. 120 mA
Length of the probe cable	1m, 2m or 4m optionally
Dimensions	136 x 161 x 45 mm (W x H x D), probe length 88 mm, probe diameter 18mm
Weight	approximately 450g - 1m probe