HI96777-01 Iron II and III Reagent Set (100 tests)

Surface water typically contains up to 0.7 mg/L of iron. Drinking water typically contains up to 0.3 mg/L of iron, but this level may increase significantly if plumbing fixtures contain iron. In well-oxygenated, non-acidic waters, iron exists mainly in the ferric form (Fe3+) and will precipitate as iron oxide hydroxide (FeO(OH)). However, anoxic water may have high levels of dissolved ferrous iron (Fe2+), which could precipitate in heating/cooling systems or other equipment after exposure to air. The Iron (II)/(III) method can be used to distinguish between the ferrous (Fe2+) and ferric (Fe3+) forms of iron in a 2-step measurement process.

 

The HI96777-01 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. These reagents use an adaptation of Standard Methods for the Examination of Water and Wastewater, 23rd Edition, 3500-Fe B, Phenanthroline Method. During the first measurement, ferrous iron (Fe2+) reacts with 1,10-phenanthroline to form an orange-red complex. During the second measurement, ferric iron (Fe3+) is converted to ferrous iron (Fe2+) by the addition of Reagent B; the resulting measurement is the sum of ferrous (Fe2+) and ferric (Fe3+) iron.

 

More Information

SKU	HI96777-01
Product Name	Iron II and III Reagent Set (100 tests) – HI96777-01
Quote Required	Yes
Package	Packets
Quantity	100 tests
Method	adaptation of Standard Methods for the Examination of Water and Wastewater, 23rd Edition, 3500-Fe B, Phenanthroline Method