OMB-JB1 FLOW CONTROLS ELECTRONIC OIL REGULATOR (P/N : 065365)
The OMB is a compressor crankcase oil level protective control ideal for use with Copeland Scroll™ models ZF, ZB, ZR and ZS. It is also recommended for Copeland™ brand products, Carlyle, Bitzer and other semi-hermetic compressors.
The OMB is a compressor crankcase oil level protective control ideal for use with Copeland Scroll™ models ZF, ZB, ZR and ZS. It is also recommended for Copeland™ brand products, Carlyle, Bitzer and other semi-hermetic compressors.
Features
• Precision oil level measurement for maximum protection
• Easy monitoring with alarm and status lights
• Foam resistant design prevents nuisance trips unlike optical sensor designs
• Contaminant proof operation ensures accurate control
• Only approved oil level control for Copeland Scroll Compressors
• 5-time lockout feature protects compressor from repeated low oil level condition
• Self-contained unit with oil level sensor and integral solenoid to manage oil level supply
• Reverse Hall-effect sensor for precise measurement of oil level and protection from sensor magnetic debris contamination
• SPDT output contact for compressor shut-down and alarming
• Easy installation by sightglass replacement
• Adapters suitable for various types of scroll compressors (not required for reciprocating compressors)
• UL Recognized (File Number# MP604)
• Flourescent floating ball
• Integral sight glass
• Debris retention magnet for reliable operation
Specifications
• Maximum working pressure: 870 psi
• Solenoid MOPD: 350 psi
• Supply voltage: 24 V AC, 50/60 Hz
• Solenoid coil: ASC 2L 24 V AC, 50/60 Hz
• Current consumption: 0.6A
• Time delay for low level signalling: 5-10 seconds
• Time delay for after setpoint recovery: 5-10 seconds
• Alarm delay time: 120 seconds
• Alarm switch: SPDT
• Alarm contact rating: 10A @ 125; 5A @ 220 V AC 50/60 Hz
• Refrigerant compatibility: HFC, HCFC, CFC
• Oil temperature: 180°F Max.
• Storage and transport temperature: 140°F Max.
• Operating ambient temperature: 120°F Max.
• Oil supply fitting: 1/4” Male SAE
• UL/CUL file number: SA8547
• Transformer VA requirements*: 25”
*NOTE: Field supplied transformer should always be of the
same primary voltage as the electrical supply system
US 14492 
GB 12187 
CA 10025 
AU 8923 
IE 5352 
BR 3676 
NZ 1397 
SG 1214 
