*** HOW TO USE ***
1. Make sure the surface is dry
2. Apply to cover up the mold
3. Wait for 5 - 10 hours, to diminish the molds
4. Wipe it with cloth, and you're done!
5.Open the lid of the product and squeeze it about 3 mm thick at the mold
Confirm the sterilization effect, if it is not completely removed, please repeat it.

Coution:
1. Wipe the residual gel after use and rinse it with plenty of water
2. Keep the sealing cover on the back cover in a cool place after use and avoid sunlight,
3. The mold hidden in the glass glue cannot be cleaned directly. Needs to be cleared before cleaning.
4. Beware of use of anti mildew gel in aluminium
5. The product is corrosive to a certain extent. Please wear gloves when using to avoid contact with skin.
product manual:
This product is in the form of a gel and contains mildew-removing and anti-mold ingredients. The active ingredients in the gel can be in close contact with the mold spots, penetrate into the roots of the mold, and peel off from the roots.

*** PRODUCT DETAILS ***
- Net Weight: 120g/0.3lb
- 100% brand new from factory
- Ingredients: sodium hypochlorite, hydroxide, etc.